Mounting The Cisco Unified Meetingplace 8112 In A 19- Or 23-Inch Frame-Relay Rack - Cisco 700 MHz Installation And Upgrade Manual

Mounting the Cisco Unified MeetingPlace 8100 Series
Attach the Cisco Unified MeetingPlace 8106 to the rack. The Cisco Unified MeetingPlace 8106 comes
Step 2
with screws to attach the mounting brackets to the rack. See
Figure 2-1
Mounting the Cisco Unified MeetingPlace 8112 in a 19- or 23-Inch Frame-Relay
Rack
To Mount the Cisco Unified MeetingPlace 8112 in a 19- or 23-Inch Frame-Relay Rack
Attach two mounting brackets to the front mounting holes of the Cisco Unified MeetingPlace 8112. See
Step 1
Figure 2-2
•
•
Slide the Cisco Unified MeetingPlace 8112 into the front of the rack.
Step 2
Attach the Cisco Unified MeetingPlace 8112 to the rack and secure it by using the eight Phillips-head
Step 3
screws that shipped with the Cisco Unified MeetingPlace 8112.
Attach two mounting brackets to the rear mounting holes of the Cisco Unified MeetingPlace 8112. See
Step 4
Figure 2-2
•
•
Secure the rear mounting bracket to the rack with the eight Phillips-head screws that shipped with the
Step 5
Cisco Unified MeetingPlace 8112.
Installation and Upgrade Guide for Cisco Unified MeetingPlace Audio Server 6.x
2-4
Mounting the Cisco Unified MeetingPlace 8106 in a Frame-Relay Rack
below.
For 19-inch racks, fasten the long side of the bracket to the Cisco Unified MeetingPlace 8112.
For 23-inch racks, fasten the short side of the bracket to the Cisco Unified MeetingPlace 8112.
below.
For 19-inch racks, fasten the long side of the bracket to the Cisco Unified MeetingPlace 8112.
For 23-inch racks, fasten the short side of the bracket to the Cisco Unified MeetingPlace 8112.
Chapter 2 Installing the Cisco Unified MeetingPlace 8100 Series Hardware
Figure 2-1.
OL-13417-01