Refill Central Lubrication System - Grizzly G0876 Owner's Manual

3.5

Refill central lubrication system

The CNC machine is equipped with a central lubrication system.
INFORMATION
The CNC milling machine is delivered without lubricating oil. The central lubrication system is
depending on the model in the working area on the column of the spindle or at other locations.
Refill the reservoir with oil through the fill cap.

 "Cooling lubricants" on page 243
Img.3-4: Old type of central lubricating system
Img.3-5: Second type of central lubricating system
Type:
Pressure
Power
Connection
filling quantity
discharge volume
Model G0876 (Mfd. Since 3/19)
DRB 12210
2.0 MPa
10 Watt
230V ~ 50Hz / 115V ~ 60Hz
1 litres
0.08 ml / cycle
Fill cap
Fill cap
-33-