Reasonably Foreseeable Misuse - Grizzly G0876 Owner's Manual

We expressly point out that the guarantee or CE conformity will expire, if any constructive, tech-
nicolor procedural changes are not performed by Grizzly Industrial, Inc.
It is also part of intended use that you
the limits of performance of the CNC machine are observed,

the operating manual is observed,

the inspection and maintenance instructions are observed.

WARNING!
Severe injuries due to non-intended use.
It is forbidden to make any modifications or alternations to the operation values of the
CNC machine. They could endanger the personnel and cause damage to the CNC
machine.
1.5

Reasonably foreseeable misuse

Any other use other than that specified under "Intended use" or any use beyond the described
use shall be deemed as non-intended use and is not permissible.
Any other use has to be discussed with the manufacturer.
It is only allowed to process metal, cold and non-inflammable materials with the milling
machine.
In order to avoid misuse, it is necessary to read and understand the operating instructions
before first commissioning.
Operators must be qualified.
1.5.1 Avoiding misuse
 Use of suitable cutting tools.
 Adapting the speed adjustment and feed to the material and workpiece.
Clamp workpieces firmly and vibration-free.

ATTENTION!
The workpiece is always to be fixed by a machine vice, jaw chuck or by another
appropriate clamping tool such as for the clamping claws.
WARNING!
Risk of injury caused by flying workpieces.
Clamp the workpiece in the machine vice. Make sure that the workpiece is firmly clamped in the
machine vice and that the machine vice is firmly clamped onto the machine table.
Use cooling and lubricating agents to increase the durability of the tool and to improve the

surface quality.
 Clamp the cutting tools and workpieces on clean clamping surfaces.
 Sufficiently lubricate the machine.
Correctly adjust the bearing clearance and the guidings.

ATTENTION!
Do not use the drill chuck as a milling tool. Never clamp a milling cutter into a drill
chuck. Use a collet chuck with collets for the end mill.
Model G0876 (Mfd. Since 3/19)
-11-