Maintenance; Operating Material - Grizzly G0876 Owner's Manual

11

Maintenance

In this chapter you will find important information about
Inspection

Maintenance

Repair

of the CNC machine.
ATTENTION!
Properly performed regular maintenance is an essential prerequisite for
operational safety,

failure-free operation,

long service life of the CNC machine and

the quality of the products which you manufacture.

Installations and equipment from other manufacturers must also be in good order and condition.
ENVIRONMENTAL PROTECTION
During work on the cooling lubricant equipment please make sure that
collecting containers with sufficient capacity for the amount of liquid to be collected

are used.
Liquids and oils should not be split on the ground.

Clean up any spilt liquid or oils immediately using proper oil-absorption methods and dispose of
them in accordance with current environmental protection regulations.
Collect leakages
Do not re-introduce liquids spilt outside the system during repair or as a result of leakage from
the reserve tank; collect them in a collecting container for disposal.
Disposal
Never dump oil or other environmentally hazardous substances which are harmful to the envi-
ronment in water inlets, rivers or channels. Used oils must be delivered to a collection centre.
Please consult your supervisor for further information on your nearest collection point.
11.1

Operating material

11.1.1 Machine lubricants
Only use appropriate lubricants which guarantee a safe operation of the machine.
Recommended lubricant class: ISO V668
Recommended lubricant:
11.1.2 Cooling lubricants
In order to avoid interferences during operation the water-mixed cooling lubricant and the slide-
way oil or grease need to be compatible.
INFORMATION
The CNC milling machine is lacquered with a
account when selecting your cooling lubricant.
Grizzly Industrial, Inc. does not assume any guarantee for subsequent damages due to
unsuitable cooling lubricants.
The flashpoint of the emulsion must be higher than 140°C.
Model G0876 (Mfd. Since 3/19)
guideway oil Mobil Vactra (Oil No. 2)
one-component paint. Take this criterion into
-243-