Possible Dangers W/Cnc Machines; Qualification Of Personnel - Grizzly G0876 Owner's Manual

1.6 Possible dangers caused by the CNC machine
The CNC machine has been tested for operational safety. The construction and type are state
of the art.
Nevertheless, there is a residual risk as the CNC machine operates with
rotating parts,

electrical voltage and currents,

compressed air,

rapid moves.

We have used construction resources and safety techniques to minimize the health risk to per-
sonnel resulting from these hazards.
If the CNC machine is used and maintained by personnel who are not duly qualified, there may
be a risk resulting from incorrect or unsuitable maintenance of the lathe.
INFORMATION
Everyone involved in the assembly, commissioning, operation and maintenance must
be duly qualified,

and strictly follow these operating instructions.

In the event of improper use
there may be a risk to personnel,

there may be a risk of damage to the CNC machine and other material values,

the correct function of the CNC machine may be affected.

Always switch off the CNC machine and disconnect it from the mains, when cleaning or mainte-
nance work is carried out.
WARNING!
The CNC machine may only be operated with functional safety devices. Disconnect the
CNC machine immediately, whenever you detect a failure in the safety devices or when
they are not fitted!
All additional parts of the machine which had been added by the customer need to be
equipped with the prescribed safety devices.
This is your responsibility being the operating company!
1.7

Qualification of personnel

1.7.1 Target group
This manual is addressed to
the operating companies,

operators having sufficient specialist knowledge,

the maintenance personnel.

Therefore, the warning notes refer to both, operation and maintenance personnel of the CNC
machine.
Determine clearly and explicitly who will be responsible for the different activities on the CNC
machine (operation, setting up, maintenance and repair). Please note the name of the responsi-
ble person into an operators´s log.
INFORMATION
Unclear responsibilities constitute a safety risk!
Always lock the main switch after switching off the CNC machine. This will prevent it from being
used by unauthorized persons.
The qualifications of the personnel for the different tasks are mentioned below:
-12-
Model G0876 (Mfd. Since 3/19)