Table of Contents
Advertisement
In the following cases, an immediate replacement is strongly recommended:
plastic deformation (distortion) by previous impact stress,
cracks,
Damage to the edge seal,
immersion of lubricating coolant in the composite structure,
destroyed or damaged safety screen (coating) on the workspace or operator's side.
11.3.2 Cleaning the electrical cabinet
Although the electrical cabinet is con-
structed to shut off external air, foreign parti-
cles such as dust and dirt may enter the
cabinet when the door is open.
Accumulation of foreign particles on the
printed circuit boards or other electronic
components could cause machine malfunc-
tion.
Clean the inside of the electrical cabinet
regularly.
Remove dust inside electrical cabinet with a
vacuum cleaner. Do not use compressed air
to clean the electrical cabinet.
Never touch circuit boards or parts around
the connector. Also avoid hitting these parts
with the vacuum.
We recommend that the electrical cabinet is cleaned every 1000 operating hours .
11.4
Interlock switch sliding door
The interlock switch can be mechanically unlock for repair and maintenance purposes. Perform
a safety check if you have set the interlock switch back to the ground state.
on page 17
Img.11-1: Interlock switch sliding door
Model G0876 (Mfd. Since 3/19)
"Safety check"
Unlocking
-249-
Advertisement
Table of Contents
