Settings
• Highlight Enable VPN connection, select Off.
• Manually reboot your phone, see
The VPN disconnection takes about one minute.
After the phone reboots, the VPN connection icon
VPN connection is disabled successfully.
Step 6
(Optional) Check whether the VPN connection is
page
Set Up a VPN Connection from the Phone Web Page
You can set up a VPN connection from the phone web page.
You can do the same configuration on your phone, see
Procedure
Step 1
On the phone web page, select Voice > System.
Step 2
Under the section VPN Settings, set the parameters described in the following table.
Table 8: VPN Settings
Parameter
VPN Server
VPN User Name
VPN Password
VPN Tunnel Group
Once you set Enable VPN connection to Off, the phone immediately tries to disconnect from
Note
the VPN server. During the process, the phone reboots automatically.
106.
Set Up a VPN Connection from the Phone Web Page
Reboot Your Phone, on page
on the phone screen disappears. This means that the
. For details, see
Disconnected
Set Up a VPN Connection , on page
Description
IP address or FQDN of the VPN server.
Default: Empty
Enter a username for a credential user on the VPN
server.
Default: Empty
Enter a password of the specified username to access
the VPN server.
Default: Empty
Enter a tunnel group assigned to the VPN user.
Tunnel group is used to identify the group policy for
the VPN connection.
Default: Empty
Cisco IP Phone 7800 Series Multiplatform Phones User Guide
114.
View the VPN Status, on
103.
105