D-Link DGS-3130 Series Web Ui Reference Manual page 459

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Log Description
Parameters description:
interface-id: The interface name.
Event description: Errored Frame Seconds Summary Event
Log Message: Errored frame seconds summary event received (Port <interface-id>)
Parameters description:
interface-id: The interface name.
Event description: Remote loopback start
Log Message: OAM Remote loopback started (Port <interface-id>)
Parameters description:
interface-id: The interface name.
Event description: Remote loopback stop
Log Message: OAM Remote loopback stopped (Port <interface-id>)
Parameters description:
interface-id: The interface name.
Interface
Log Description
Event description: Port link up.
Log Message: Port <portNum> link up, <link state>
Parameters description:
portNum: 1.Interger value;2.Represent the logic port number of the device.
link state: for ex: , 100Mbps FULL duplex
Event description: Port link down.
Log Message: Port <portNum> link down
Parameters description:
portNum: 1.Interger value; 2.Represent the logic port number of the device.
IP Directed Broadcast
Log Description
Event description: IP Directed-broadcast rate exceed 50 packets per second on a
certain subnet.
Log Message: IP Directed Broadcast packet rate is high on subnet. [(IP: %s)]
Parameters description:
IP: the Broadcast IP destination address.
Event description: IP Directed-broadcast rate exceed 100 packets per second
Log Message: IP Directed Broadcast rate is high.
LACP
Log Description
Event description: Link Aggregation Group link up.
Log Message: Link Aggregation Group <group_id> link up.
Parameters description:
group_id: The group id of the link up aggregation group.
448
Severity
Warning
Warning
Warning
Severity
Informational
Informational
Severity
Informational
Informational
Severity
Informational