Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Click the Apply button to accept the changes made.
After clicking the Add MA button, the following page will appear.
The fields that can be configured are described below:
Parameter
MA Name
MA VID
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
Click the Edit button to modify the specified entry.
Click the Delete button to delete the specified entry.
Click the Add MEP button to add a new Maintenance association End Point (MEP) entry.
After clicking the Edit button, the following page will appear.
Description
• Chassis - Specifies to transmit the sender ID TLV with the chassis ID
information.
• Manage - Specifies to transmit the sender ID TLV with the managed
address information.
• Chassis_Manage - Specifies to transmit the sender ID TLV with the
chassis ID information and the managed address information.
Figure 10-3 CFM Settings (Add MA) Window
Description
Enter the Maintenance Association (MA) entry name here. This name can be
up to 22 characters long. Each MA in an MD must have a unique MA name.
MAs configured in different MDs may have the same MA identifier. When the
MA entry is deleted, the configuration on it is also deleted.
Enter the Maintenance Association (MA) entry VLAN ID here. The range is from
1 to 4094.
Figure 10-4 CFM Settings (Add MA, Edit) Window
378
Advertisement
Table of Contents
