Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
MLD Snooping Filter Settings
This window is used to display and configure the MLD snooping settings.
To view the following window, click L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Filter
Settings, as shown below:
The fields that can be configured in MLD Snooping Rate Limit Settings are described below:
Parameter
Unit
From Port - To Port
Limit Number
Action
VID
Click the Apply button to accept the changes made.
Figure 5-76 MLD Snooping Filter Settings Window
Description
Select the Switch unit ID that will be used here.
Select the Switch port range that will be used here. This is only available if the
Port option was selected as the action below.
Enter the limit number here. This is to configure the rate of MLD control packets
that the Switch can process on a specific interface. The range is from 1 to 1000
packets per second. Select the No Limit option to remove the limitation.
Select the action that will be taken here. Options to choose from are Port and
VLAN.
Enter the VLAN ID here. This is the Layer 2 VLAN on a trunk port and applies
the filter to packets that arrive on that VLAN. The range is from 1 to 4094. This
is only available if the VLAN option was selected as the action.
164
Advertisement
Table of Contents
