Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
To view the following window, click L2 Features > STP > MST Configuration Identification, as shown below:
The fields that can be configured for MST Configuration Identification are described below:
Parameter
Configuration Name
Revision Level
Click the Apply button to accept the changes made.
In the Private VLAN Synchronize section, the user can click the Apply button to synchronize the private VLANs.
The fields that can be configured for Instance ID Settings are described below:
Parameter
Instance ID
Action
VID List
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Figure 5-499 MST Configuration Identification Window
Description
Enter the MST. This name uniquely identifies the MSTI (Multiple Spanning Tree
Instance). If a Configuration Name is not set, this field will show the MAC
address to the device running MSTP.
Enter the revision level value here. This value must be between 0 and 65535.
By default, this value is 0. This value, along with the Configuration Name,
identifies the MSTP region configured on the Switch.
Description
Enter the instance ID here. This value must be between 1 and 64.
Select the action that will be taken here. Options to choose from are Add VID
and Remove VID.
Enter the VID list value here. This field is used to specify the VID range from
configured VLANs set on the Switch.
139
Advertisement
Table of Contents
