Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Dynamic ARP Inspection
ARP Access List
This window is used to display and configure the dynamic ARP inspection settings.
To view the following window, click Security > IMPB > IPv4 > Dynamic ARP Inspection > ARP Access List, as
shown below:
The fields that can be configured are described below:
Parameter
ARP Access List Name
Click the Add button to add a new entry based on the information entered.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specified entry.
After clicking the Edit button, the following window will appear.
The fields that can be configured are described below:
Parameter
Action
IP
Sender IP
Sender IP Mask
Figure 9-44 ARP Access List Window
Description
Enter the ARP access list name used here. This name can be up to 32
characters long.
Figure 9-45 ARP Access List (Edit) Window
Description
Select the action that will be taken here. Options to choose from are Permit
and Deny.
Select the type of sender IP address that will be used here. Options to choose
from are Any, Host, and IP with Mask.
After selecting the Host or IP with Mask options as the type of IP, enter the
sender IP address used here.
After selecting the IP with Mask option as the type of IP, enter the sender IP
mask used here.
329
Advertisement
Table of Contents
