Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Role
Type
Unit
From Port - To Port
Click the Apply button to accept the changes made.
The fields that can be configured in Replace Source IP Settings are described below:
Parameter
VID
Action
Address Type
IP Address
From
Click the Apply button to accept the changes made.
The fields that can be configured in Multicast VLAN Table are described below:
Parameter
VID
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to view all the entries.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Description
Select Delete to delete an entry based in the information entered.
Select the role here. Options to choose from are Receiver and Source.
• Receiver - Specifies to configure the port as a subscriber port that can
only receive multicast data in the multicast VLAN.
• Source - Specifies to configure the port as an uplink port that can send
multicast data in the multicast VLAN.
Select the type here. Options to choose from are Tagged and Untagged.
• Tagged - Specifies that if a port is a tagged member, the packets sent
from the port are tagged with the Multicast VLAN ID.
• Untagged - Specifies that if the port is an untagged member, then the
packets will be forwarded in the untagged form.
Select the Switch unit ID that will be used here.
Select the Switch port range that will be used here.
Description
Enter the multicast VLAN ID that will be used here. The range is 2 to 4094.
Select Add to add a new entry based in the information entered.
Select Delete to delete an entry based in the information entered.
Select the address type here. Options to choose from are IPv4 and IPv6.
• IPv4 - Specifies to enter the source IPv4 address for IGMP control packet
reporting up to routers.
• IPv6 - Specifies to enter the source IPv6 address for MLD control packet
reporting up to routers.
Enter the IPv4/IPv6 address here.
Select the "from" option here. Options to choose from are Receiver, Source,
and Both.
• Receiver - Specifies that the source IPv4/IPv6 address of the IGMP/MLD
report/leave packet received on any multicast VLAN receiver port will be
replaced.
• Source - Specifies that the source IPv4/IPv6 address of the IGMP/MLD
report/leave packet received on any multicast VLAN source port will be
replaced.
• Both - Specifies that the source IPv4/IPv6 address of the IGMP/MLD
report/leave packet received on any port in the multicast VLAN will be
replaced.
Description
Enter the multicast VLAN ID that will be used here. The range is 2 to 4094.
170
Advertisement
Table of Contents
