Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
IGMP Static Group Settings Page
This window is used to display and configure the IGMP static group settings.
To view the following window, click L3 Features > IP Multicast Routing Protocol > IGMP > IGMP Static Group
Settings, as shown below:
The fields that can be configured are described below:
Parameter
Interface VLAN
Group
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to locate and display all the entries.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
IGMP Dynamic Group Table Page
This window is used to find and display the IGMP dynamic group table.
To view the following window, click L3 Features > IP Multicast Routing Protocol > IGMP > IGMP Dynamic Group
Table, as shown below:
The fields that can be configured are described below:
Parameter
Interface VLAN
Group
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to locate and display all the entries.
Figure 6-71 IGMP Static Group Settings Window
Description
Enter the interface VLAN ID used here. This value must be between 1 and
4094.
Specifies the IP multicast group address.
Figure 6-72 IGMP Dynamic Group Table Window
Description
Enter the interface VLAN ID used here. This value must be between 1 and
4094.
Specifies the IP multicast group address.
232
Advertisement
Table of Contents
