DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPFv2 Interface Settings, as shown below:
The fields that can be configured in OSPF Interface Settings are described below:
Parameter
Area ID
Network IP Address
Network Mask
Click the Apply button to accept the changes made.
The fields that can be configured in OSPF Interface Table are described below:
Parameter
Interface Name
Click the Find button to locate a specific entry based on the information entered.
Click the Show Detail button to view more detailed information about the entry.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Figure 6-43 OSPFv2 Interface Settings Window
Description
Select and enter the OSPFv2 area ID here. This can be specified in the IP
address format or in the decimal value format. The decimal range is from 0 to
4294967295.
Enter the network IPv4 address here.
Enter the network IPv4 subnet mask here.
Description
Enter the name of the interface to be displayed here.
212