Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
To view the following window, click Management > Login Method, as shown below:
The fields that can be configured in Enable Password are described below:
Parameter
Level
Password Type
Password
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specified entry.
The fields that can be configured in Login Method are described below:
Parameter
Login Method
Click the Apply button to accept the changes made.
Figure 4-6 Login Method Window
Description
Select the privilege level for the user here. The range is from 1 to 15.
Select the password type for the user here. Options to choose from are:
• Plain Text - Specifies that the password will be in plain text. This is the
default option.
• Encrypted - Specifies that the password will be encrypted based on SHA-
1.
• Encrypted-MD5 - Specifies that the password will be encrypted based on
MD5.
Enter the password for the user account here. In the plain-text form, the
password can be up to 32 characters long, is case-sensitive, and can contain
spaces. In the encrypted form, the password must be 35 bytes long and is
case-sensitive. In the encrypted MD5 form, the password must be 31 bytes
long and is case-sensitive.
Description
After clicking the Edit button, this parameter can be configured. Select the login
method for the specified application here. Options to choose from are No
Login, Login and Login Local.
• No Login requires no login authentication to access the specified
application.
• Login will require the user to at least enter a password when trying to
access the application specified.
• Login Local requires the user to enter a username and a password to
access the specified application.
34
Advertisement
Table of Contents
