Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Port1
Ring ID
Ring Type
Click the Back button to discard the changes made and return to the previous window.
Click the Apply button to accept the changes made.
After click the Show Detail button, the following window will appear.
Click the Back button to return to the previous window.
After selecting the ERPS Brief tab option, at the top of the page, the following page will be available.
Description
Select the checkbox and then select the Switch unit ID and the port number
that will be the second ring port of the physical ring. Select the None option,
from the drop-down menu, specifies that the inter-connected node is a local
node endpoint of an open ring. Select the Specify radio button to configure this
parameter as normal. Select the None radio button to revert this parameter to
the default setting.
Select the checkbox and enter the ring ID here. The range is from 1 to 239.
Select the Specify radio button to configure this parameter as normal. Select
the None radio button to revert this parameter to the default setting.
Select the checkbox and then select the ring type here. Options to choose from
are Major Ring and Sub Ring.
Figure 5-534 ERPS (View Detail) Window
Figure 5-545 ERPS (ERPS Brief) Window
143
Advertisement
Table of Contents
