CRT 48-33K
6.2
Troubleshooting the LP System
Problem
Engine cranks, but does
not start
Engine starts, but opera-
tion is sluggish
Engine starts, but stops
running after a short
time
wc_tx002047gb.fm
Reason
Empty LP cylinder
Discharge valve on LP cylinder
closed
LPG / gas selector switch in
wrong position
Lock-off valve not operating
Cold ambient temperature
LP not flowing to combustion
chamber. Reasons may be:
Discharge valve partly closed
LP gas leak
Fuel hose partly blocked
Clogged or damaged LPG
vaporizer
Remedy
Replace.
Open the discharge valve.
Make sure the LPG / gas selector switch
is set to LPG.
Check electrical connections to lock-off
valve
Consult engine owner's service man-
ual—see procedure for checking
engine carburetor fuel solenoids.
Allow engine to warm up for a few minutes
before operating the trowel.
Open the valve fully.
Determine source of leak; repair.
Check for kinks or obstructions; repair.
Check vaporizer for obstructions. If
there are none, consult the engine
owner's manual for service information.
77
Troubleshooting