Mounting Float Pans - Husqvarna CRT48-33K Operator's Manual

Maintenance
5.11

Mounting Float Pans

Overview Certain applications may require the use of float pans. Optional float pans are
available from your Wacker Neuson dealer.
Procedure Perform the procedure below to mount the float pans.
1. Stop the engine.
2. Lift the trowel to access the blades (a). (See Lifting The Machine.)
3. Support the frame with blocks while the machine is elevated.
4. Position each pan (b) against the blades. Turn the pans either left or right to
engage clip angles (c) as shown.
Note: Right-hand trowel blades turn counter-clockwise; left-hand trowel blades turn
clockwise.
5. Lower the trowel.
WARNING
Float pans can fall off a raised trowel, striking nearby personnel.
► Do not lift the trowel overhead after float pans have been mounted.
b
c
a
58
CRT 48-33K
b
c
a
wc_gr009298
wc_tx002046gb.fm