Periodic Maintenance Schedule - Husqvarna CRT48-33K Operator's Manual

CRT 48-33K
5.3

Periodic Maintenance Schedule

The table below lists basic machine maintenance. Tasks designated with check
marks may be performed by the operator. Tasks designated with square bullet
points require special training and equipment.
Grease trowel arms.
Check fuel level.
Check engine oil level.
Inspect air filter. Replace as needed.
Check external hardware.
Pressure wash all surfaces until free of
concrete.
Check coolant level.
Check oil level in gearboxes.
Grease gearbox input shaft fitting
Grease control linkage.
Check drive belt for wear.
2
Change engine oil.
Check fuel filter.
Clean and check spark plug.
2
Replace oil filter.
Check fan belt.
Replace spark plug.
Replace fuel filter.
Replace oil in gearboxes.
3
Change coolant.
1
Manual steering models only.
3
Change at 1000 hours, or yearly, whichever comes first.
wc_tx002046gb.fm
Daily







1
Every Every Every
20 50 100
hrs. hrs. hrs.







2
Perform initially after first 50 hours of operation.
51
Maintenance
Every Every
200 300
hrs. hrs.








Every
1000
hrs.

