Foreword - Husqvarna CRT48-33K Operator's Manual

CRT 48-33K

Foreword

SAVE THESE INSTRUCTIONS—This manual contains important instructions for
the machine models below. These instructions have been written expressly by
Wacker Neuson Production Americas LLC and must be followed during installation,
operation, and maintenance of the machines.
Machine
CRT 48-33K
CRT 48-33K DF
Machine A nameplate listing the model number, item number, revision number, and serial
identification
number is attached to this machine. The location of the nameplate is shown above.
Serial number For future reference, record the serial number in the space provided below. You will
(S/N)
need the serial number when requesting parts or service for this machine.
Serial Number:
Machine From this point forward in this documentation, Wacker Neuson Production

documentation
Americas LLC will be referred to as Wacker Neuson.
Keep a copy of the Operator's Manual with the machine at all times.

For spare parts information, please see your Wacker Neuson Dealer, or visit

the Wacker Neuson website at http://www.wackerneuson.com/.
When ordering parts or requesting service information, be prepared to provide

the machine model number, item number, revision number, and serial number.
Expectations This manual provides information and procedures to safely operate and

for
maintain the above Wacker Neuson model(s). For your own safety and to
information in
reduce the risk of injury, carefully read, understand, and observe all instructions
this manual
described in this manual.
Wacker Neuson expressly reserves the right to make technical modifications,

even without notice, which improve the performance or safety standards of its
machines.
wc_tx002044gb.fm
Item Number
5200002353, 5200002354
5200007686, 5200007687
5
Foreword
wc_gr010110