Husqvarna CRT48-33K Operator's Manual page 19

CRT 48–33K
Continued from the previous page.
Replacing Follow the safety instructions below when replacing empty LP cylinders.
Empty LP
Only a person familiar with the process should replace empty LP cylinders.

Cylinders
Replace empty LP cylinders only in a well-ventilated area.

Do not replace empty LP cylinders near sparks or open flames.

Do not replace empty LP cylinders while the engine is running.

Do not allow LP cylinders to remain in direct sunlight for extended periods

during the replacement process.
Ensure that the full LP cylinder is properly seated and fastened in the tank

clamps.
Ensure that all hose connections are tight, and perform a leak test, before

opening the discharge valve.
wc_si000713gb.fm
19
Safety Information