Husqvarna CRT48-33K Operator's Manual page 57

CRT 48-33K
Continued from the previous page.
2. Position and align the blades.
If installing combination blades (d), orient the blades as shown in the diagram

and align the screw holes. This positions the raised edge of each blade correctly
for the rotation of each rotor.
If installing finish blades, simply align the screw holes. Blade orientation is not

critical with finish blades.
3. Coat the screw threads with bearing grease. A grease coating will prevent wet
concrete from cementing the screws in place. This step will also make blade
removal easier in the future.
4. Install the screws and tighten securely. Do not overtighten.
Result The blades have now been changed.
wc_tx002046gb.fm
57
Maintenance