Table of Contents
Advertisement
FCCS Programming (cont'd)
System Data 1, Index 41: Designate the Trunk Queuing Override Timer
Index 68, b3:
0/1:
Index 159:
STEP 2:
ASPAN - These data must be assigned to the NCN.
TN:
ACC:
CI:
SRV:
SID:
SID:
STEP 3:
ANPDN - These data must be assigned to the NCN.
TN:
1st DC:
CI:
NND:
BLF:
STEP 4:
ARTDN - These data must be assigned to the NCN.
LGRT:
Assign CDN 9:TQ, Trunk Queuing Service = 1
When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
Note 1:
in addition to ASYDL or ASYDN.
The current data should also be set in addition the above-mentioned command.
Note 2:
The command to be set to the node that accommodates the trunk: ARTD
The command to be set to all the nodes: ASFC, AKYD, ASPA
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Outgoing Trunk Queuing - D
Enables automatic cancel timer
-/Automatic cancel timer is Available
Designate Automatic Cancel Timer
Tenant Number
Access number
B = Busy (for Entry), N = Normal (for Cancel)
SSC
19 = OG Queuing-Entry
20 = OG Queuing-Cancel
Tenant
1st Digit
Normal (N), Hooking (H) and Busy (B)
Number of Necessary Digits
Busy Lamp Field
Logical Route Number
term
O-2D
Page 559
Advertisement
Table of Contents
