Table of Contents
Advertisement
Operating Procedure (cont'd)
Hear service set tone when # is pressed. The service set tone continues for 3 seconds.
d.) Start your recording when the service set tone is stopped.
e.) Replace the handset to finish recording.
Note:
The recording length is a multiple of 2 (= 2n sec).
4.
Playback by designating RT
a.) Lift a handset; receive dial tone.
b.) Dial the MULTI CHANNEL RECORDING (REPLAY) access code from the station; receive
special dial tone.)
c.) Enter Route Number and press #; the special dial tone stops.
d.) A recorded message of the designated route is automatically played back.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Multi Channel Recording - DAT
RECORDING START
Recording Time
Note
RECORDING END
(Time Display)
REPLAY
(Time Display)
REPLAY
REPLAY START
Replay Time
DDD
In 5 seconds
005
Route
In 5 seconds
DDD
1
1
M-48
Page 525
Advertisement
Table of Contents
