Table of Contents
Advertisement
M-41
Service Conditions (cont'd)
13.
The following services are activated within one node. The maximum number of times for activating this
feature is the same as previous software releases:
MULTIPLE CALL FORWARDING - ALL CALLS [M-44]:
MULTIPLE CALL FORWARDING - BUSY LINE [M-24]:
MULTIPLE CALL FORWARDING - DON'T ANSWER [M-25]: unlimited
14.
The following are detailed examples of Call Forwarding - CCIS activation. These examples are activated
under the conditions below:
• The maximum number of times to activate the service is three (programmed in Office A and Office B).
• The last call forwarding is operated by Call Forwarding - All Calls/Don't Answer service.
• Any kind of D
• Any kind of Call Forwarding service (All Calls/Busy Line/Don't Answer) is available to be set at the
calling/intermediate terminal.
a.) The service is restricted because the terminating Office B is unavailable for enhanced Call
Forwarding - CCIS service.
Page 964
Multiple Call Forwarding - Busy Line - CCIS
term
, ISDN terminal, PHS, etc. is available to be used for the calling/intermediate party.
The node that decides number of times for activating service.
The node that is available for the enhanced Call Forwarding - CCIS services.
The node that is unavailable for the enhanced Call Forwarding - CCIS services.
Office A
CCIS
1st C.F.
Office B
CCIS
2nd C.F.
UNAVAILABLE
NEAX2400 IPX Feature Programming Manual
5 times
5 times
Office C
NDA-24297, Issue 1
Advertisement
Table of Contents
