Table of Contents
Advertisement
C-169
Service Conditions (cont'd)
4.
A station assigned EMERGENCY CALL [3-11] (SFI = 24) cannot be applied to operating station of this
feature.
5.
The DISC key used for this feature can be assigned by FKY = 131 of AKYD command.
6.
When an analog station uses this feature while in ADD-ON CONFERENCE-8 PARTY [A-121], assign
System Data 1 Index 803 Bit2 = 1 also. However, the analog station assigned SFI 131 = 1 (permission of
calling a ADD-ON CONFERENCE-8 PARTY [A-121]) cannot be applied to operating station for this
feature.
7.
When System Data1 Index 244 Bit 6 = 1 is assigned, switch hook flash cannot be used while in THREE-
WAY CALLING [T-2].
term
8.
A D
can execute this feature using the Flash Button (FKY = 21) key as a substitute for the DISC key.
In this case, comply with operating procedure for Analog Station/PS.
9.
A second party (second call) is the last terminal connected with operation station. Therefore, when the user
changes a party using TRANSFER key, original party and second party are also changed.
10.
When there is a call originated from attendant console in the calls related to this feature, this feature is not
available.
11.
When assigning DISC key to soft key, DISC is displayed on a LCD of D
follows:
Programming
STEP 1:
ASYDL - allow this feature.
System Data 1 Index 803 Bit 1: 0/1 =
System Data 1 Index 803 Bit 2: 0/1 =
STEP 2:
ADSL/AKYD - assign disconnection (DISC) key used for this feature to soft/function key.
ADSL - when assigning DISC key to soft key
SKP (SOFT KEY PATTERN):
SN (STATUS NUMBER):
SKN (SOFT KEY NUMBER):
FKY (FUNCTION KEY DATA):
AKYD - when assigning DISC key to function key
KYN:
KYI (SERVICE CONDITION):
FKY (FEATURE KEY CODE FOR FLEX KEYS): 131
Page 268
Consultation Hold Release
DISC KEY
PRESS THIS KEY TO
RELEASE THE LAST >>>
CALLED PARTY AND
RECONNECT TO THE
<<<
HELD PARTY
this feature is not allowed/allowed.
analog station cannot/can use this feature during ADD-ON
CONFERENCE-8 PARTY [A-121].
term
. HELP for DISC key is as
0-15
5 (Consultation Hold)/9 (Three-Way Calling)
1-16
131
(KEY NUMBER)
1 (Function Key)
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
