Table of Contents
Advertisement
Programming
STEP 1:
ANPD - Reserve a number level for feature access and cancel. Assign for Normal, (N) and Hooking
(H). Assign NND in accordance with a predetermined numbering plan.
STEP 2:
ASPA - Assign the access code for Tone Block as shown below:
CI = H, SRV=SSCA, SIDA=48 (Data Privacy on Demand; Entry)
CI = H, SRV=SSCA, SIDA=49 (Data Privacy on Demand; Cancel)
CI = N, SRV=SSCA, SIDA=48 (Data Privacy on Demand; Entry)
STEP 3:
ASYD - Assign the system data.
SYS1, Index 322, b6
0=SPDT is sent after dialing the access code for this service.
1=DT is sent after dialing the access code for this service.
FCCS Programming
No unique programming is required for the FCCS network.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Tone Block
T-63
Page 775
Advertisement
Table of Contents
