Table of Contents
Advertisement
I-2
Programming
STEP 1:
ASYD - System Data 2, Indexes 8 & 9, flag the type of incoming calls the Attendant Console should
expect.
Note
Index 8
Bit 0:
Listed Directory Number
Bit 1:
Incoming Station Call
Bit 2:
Attendant Recall
Bit 3:
FX
Bit 4:
WATS
Bit 5:
CCSA (DID)
Bit 6:
TIE Line
Bit 7:
Call Forwarding Busy Line
Index 9
Bit 0:
Call Forwarding Don't Answer
Bit 1:
Call Forwarding Intercept
Bit 2:
Special Common Battery Station
Bit 3:
Interposition Transfer
Note:
System Data 2, Index 8, Bits 6 & 7, and System Data 2, Index 9, Bits 0-3 can be assigned different meanings
via the AAKP command.
STEP 2:
ARTD - Flag the type of route in CDN 6:TCL, Trunk Class.
0:
Not used
1:
DDD Line (LDN)
2:
FX Line (FX)
3:
WATS Line (WATS)
4:
TIE Line (TIE)
5:
CCSA Line (CCSA)
6:
Toll Line
7:
CAS Line
8:
Paging
9:
Not used
10:
Not used
11:
General page
12:
Radio page
STEP 3:
AAKP - This command may be used to change the meaning of the top six keys of the Call
Identification keys of the Attendant Console. (See System Data 2, Indexes 8 & 9.)
The Following functions may be assigned to Key Numbers (KYN) 1-6.
Function:
a:
CAS
b:
Off-Hook Alarm
c:
Priority Call 1
d:
Priority Call 2
e:
Priority Call 3
Page 388
Incoming Call Identification
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
