NEC NEAX2400 IPX Programming Manual page 1050

Feature programming manual
Hide thumbs Also See for NEAX2400 IPX:
Table of Contents

Advertisement

Interactions (cont'd)
4.
THREE-WAY CALLING [T-2]: Station A cannot include restricted Station B in a THREE-WAY
CALLING connection with Route 1.
5.
DAY/NIGHT CLASS OF SERVICE [D-15]: Restricted Station B may be allowed access to Route 1 when
the system is placed in the Night mode. See DAY/NIGHT CLASS OF SERVICE [D-15].
6.
RESTRICTION FROM OUTGOING CALLS are constructed on a per-route restriction basis. Two Route
Restriction Indexes are constructed; RRI 2, Outgoing calls via the ATTENDANT CONSOLE [A-3] and
RRI 3, Outgoing Call via Direct Dial Access.
Programming
STEP 1:
ASYD - SYS1, Index 75. Should the following commands be developed for Day/Night. 0/1: No/Yes.
Bit 0 - Develop ARSC command for Day/Night?
Bit 3 - Develop ATDP command for Day/Night?
SYS2, Index 3, bits 4 & 5. Should a toll restricted station be routed to the ATTENDANT CONSOLE
[A- 3] or receive Reorder tone? Reorder Tone: bit 4 = 0, 5 = 0.
ATTENDANT CONSOLE [A-3]:bit 4 = 1, bit 5 = 0. Route Restriction Class
STEP 2:
ARSC - 16 different Route Restriction Classes may be constructed either allowing, denying, or Toll
Restricting access to the various routes of the stem. Assign the RSC using Route Restriction Indexes 2
(Outgoing via the ATTENDANT CONSOLE [A-3]) and 3 (Outgoing Direct).
STEP 3:
ASDT - Assign Tenant No., Station No., LENS No., and the Telephone Equipment Class (TEC) to the
station. This is used in regular Business systems. Also assigned to the telephone is the Service Feature
Class (SFC) and Route Restriction Class RSC.
TN:
Tenant Number
STN:
Station Number
LENS: Line Equipment Number (6 digits)
TEC:
Telephone Class (1 -31)
1: DP (10pps)
2: PB
3: DP/PB
11: VMM
12: D
13: Data terminal via D
14: Hot Line
15: CAS Line
16: Data Terminal Via Data Module
18: Virtual Circuit
19: TMM
20: PSM
23: ISDN Terminal
27: Eight Conference Equipment
RSC: Route Restriction Class (0-15)
For assignment of RSC, ARSC command.
SFC:
Service Feature Class (0-15)
STEP 1:
For assignment of SFC, ASFC command
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Restriction from Outgoing Calls - CCIS
term
V (IV)
term
R-22
Page 1007

Advertisement

Table of Contents
loading

Table of Contents