Table of Contents
Advertisement
Service Conditions (cont'd)
•
ATTENDANT CAMP-ON WITH TONE INDICATION - CCIS [A-45]
•
AUTOMATIC RECALL [A-8]
•
Call Return from Hold
•
Operator Call
•
LDN Call
Feature 2:
•
Station dials Message Center Number Directory.
•
Direct Trunk Call to Message Center.
•
Trunk Call to Message Center extended by ATTENDANT
•
Station Call is FORWARDED-ALL CALLS to Message Center.
•
Trunk Call is FORWARDED-ALL CALLS to Message Center.
•
Station Call is FORWARDED-BUSY LINE to Message Center.
•
Trunk Call is FORWARDED-BUSY LINE to Message Center.
•
Station Call is FORWARDED-DON'T ANSWER to Message Center.
•
Trunk Call is FORWARDED-DON'T ANSWER to Message Center.
2.
The PBX MCI can control the display of a 16-Button D
applications of the MCI can be displayed. The four applications are as follows: MW in a Message Center
system, VMM in a Voice Mail system, TMM in a Text Mail system, and FMM in a Fax Mail system.
3.
If an ATTENDANT CONSOLE [A-3] calls a UCD group directly for Feature 2, the PBX will not generate
a call record to the MCI.
4.
If the Host/CPU malfunctions and stops collecting call records, the PBX can store up to 16 call records. If
the maximum of 16 call records is stored and a 17th is generated, the system will overwrite the oldest
stored record, thus giving the stack the most recently generated call records.
5.
The PBX connected to a Message Center CPU in a CCIS network forms a Message Center Node. In the
CCIS network, one Message Center Node can be provided.
6.
The maximum number of remote nodes where the Message Center CPU sends the OFF command for
MWLs of all the stations is 32.
7.
This service is used together with CALLED NUMBER DISPLAY-ATTENDANT [C-59].
Centralized Message Center Interface function in the network through FCCS groups and NEAX2000 IVS
1.
For general information of this network, refer to "Network Through FCCS Groups and NEAX2000 IVS
in the NEAX2400 IPX No. 7 CCIS System Manual.
2.
Maximum 8-digit telephone numbers (assigned in AELGN command) are available for MCI message by
system data assignment. At this time, the MCI equipment should be adapted to 8-digit telephone numbers.
When the Centralized Office adopts the ICS format method, the receiving message field is output as it is.
In case of IMX format method, the originating information field is also output to the telephone number
field.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Message Center Interface - CCIS
term
for Message Indication. One of four
M-67
2
2
",
Page 985
Advertisement
Table of Contents
