Table of Contents
Advertisement
M-42
Service Conditions (cont'd)
Example 2: Multiple Call Forwarding - CCIS service is restricted because the service is not effective at
the node.
Calling Party
Intermediate Party
12.
Even if Call Forwarding is set from the forwarded station to the forwarding station, the Call Forwarding
service is effective, as shown in the example below:
When Office A selects the number of times for Call Forwarding for 5 times, five times of Call Forwarding
are executed as Call Forwarding 1 to Call Forwarding 2 to Call Forwarding 3 to Call Forwarding 2 to Call
Forwarding 3.
13.
The following services set to the forwarded destination are not available with Multiple Call Forwarding -
CCIS services, except when the services below are activated through CCIS link:
CALL FORWARDING - ALL CALLS - OUTSIDE
CALL FORWARDING - BUSY LINE - OUTSIDE
CALL FORWARDING - DON'T ANSWER - OUTSIDE
14.
The following services are activated within one node. The maximum number of times for activating this
feature is the same as previous software releases:
MULTIPLE CALL FORWARDING - ALL CALLS [M-44]:
MULTIPLE CALL FORWARDING - BUSY LINE [M-24]:
MULTIPLE CALL FORWARDING - DON'T ANSWER [M-25]: unlimited
Page 974
Multiple Call Forwarding - Don't Answer - CCIS
1st C.F.
Office A
CCIS
1st C.F.
2nd C.F.
When the call is forwarded
by C.F. - A/D - CCIS, the call
3rd
C.F.
Office B
CCIS
2nd C.F.
NEAX2400 IPX Feature Programming Manual
terminates to this station.
Office C
3rd C.F.
[C-28]
[C-60]
[C-74]
5 times
5 times
NDA-24297, Issue 1
Advertisement
Table of Contents
