GE Amersham ImageQuant 800 User Manual page 42

3 Handle methods in ImageQuant 800 control software
3.3 Advanced settings
When using the lower tray position, it is possible to crop the capture area. The option
for this is found under Advanced settings in the method window for all imaging methods.
To change the capture area of the lower tray position, use the following steps.
Step
1
2
3
42
Action
Under Advanced settings, tap Capture area.
Tap the tabs on the right side to select the desired capture area.
160 × 220 mm
•
133 × 183 mm
•
107 × 147 mm
•
80 × 110 mm
•
Result: the capture area is changed to the selected size.
Note:
Changing the capture area is only possible in the Lower tray position. In the
Upper tray position, it is possible to see a live view of the capture area to po-
sition the sample within the default capture area.
Tap Select.
Amersham ImageQuant 800 User Manual 29383813 AA