Start The Amersham Imagequant 800 Control Software - GE Amersham ImageQuant 800 User Manual

2 System Preparation
2.1 Amersham ImageQuant 800 control software

2.1.2 Start the Amersham ImageQuant 800 control software

2.1.2 Start the Amersham ImageQuant 800 control software
Introduction
This section contains information on how to start the Amersham ImageQuant 800 system
via Amersham ImageQuant 800 control software. For information on how to set up and
install the system, see Amersham ImageQuant 800 Operating Instructions.
Start the system
Follow the steps below to start the Amersham ImageQuant 800.
Step
1
2
3
4
12
Action
Make sure that the instrument is plugged in to a mains power supply.
Press the power button on the right side of the instrument to activate it.
Result: The instrument's self-diagnostic process will initialize.
Note:
The self-diagnostic process will normally take a few minutes.
Turn on the computer and log into Windows.
Note:
The Amersham ImageQuant 800 control software will auto-start after Win-
dows login.
Tap I Agree to agree to the End User License Agreement.
Note:
Uncheck the Show license agreement at startup box to no longer see the
End User License Agreement at startup.
Amersham ImageQuant 800 User Manual 29383813 AA