Configuring Recording Settings - Honeywell Performance Series User Manual

Configuring Recording Settings

You can configure recording settings on the Setup > Storage > Record Control page.
By default, recorded video files are 8 minutes long. To change this setting, enter a time
between 1 and 120 minutes in the Pack Duration field.
By default, the pre-event record time (the number of seconds the system stores in a buffer)
is 5 seconds. To change this setting, enter a time between 0 and 5 seconds in the Pre-event
Record field.
From the Disk Full list, select Overwrite or Stop.
Set Record Mode to Auto, Manual, or Off.
From the Record Stream list, select the stream profile that you want to use for recording
video: Main Stream or Sub Stream.
Click Save to apply the settings.
• Overwrite: Recording continues when disk capacity is reached and overwrites
previously saved video.
• Stop: Recording stops when disk capacity is reached. Nothing is overwritten and no
further video is recorded.
• Auto: Video records continuously.
• Manual: Video recording must be initiated by user.
• Off: Video recording is disabled.
Configuring Recording Settings | 59
800-23288 - A - 07/2017