Resetting The Camera; Backing Up/Restoring A Configuration - Honeywell Performance Series User Manual

78 | Performance Series IP Camera User Guide

Resetting the Camera

You can reset the camera to its factory default settings on the Setup > System > Default
page.
To reset the camera:
1.
2.

Backing Up/Restoring a Configuration

You can back up or restore configuration settings on the Setup > System > Import/Export
page.
To back up a configuration:
1.
2.
To restore a saved configuration:
1.
2.
www.honeywell.com/security
Note Some configuration information, including the IP address, will be lost when the
camera reverts to its factory default settings.
Click Default.
A confirmation message appears. Click OK to continue. The camera reboots
automatically and reverts to its factory default settings.
Click Export. The Save As window opens.
By default, the backup file is named DeviceConfig.backup. Rename the file if you want,
navigate to the directory where you want to save the file, and then click Save. The file
path is displayed under Backup Path.
Click Import. The directory displayed under Backup Path opens in a new window.
Click the backup file (for example, DeviceConfig.backup). The configuration settings
are applied immediately.