Configuring Maintenance Settings
Two automatic maintenance functions are available on the Setup > System > Auto Maintain
page. You can set up the camera to reboot daily or weekly and delete old files automatically.
To enable the auto reboot function, select the Auto Reboot check box, and then specify the
reboot schedule (for example, every Tuesday at 2 a.m.). Click Save to apply the settings.
To enable the auto delete function, select the Auto Delete Old Files check box, and then
specify the age (in days) of the files to be deleted. For example, if you enter 30, files that are
30 days old and older will be deleted automatically. Click Save to apply the settings.
Upgrading the Firmware
You can upgrade the camera firmware on the Setup > System > Upgrade page.
To upgrade the firmware:
1.
2.
3.
4.
Viewing Version Information
You can view the camera's firmware version, web client version, ONVIF version, and serial
number on the Setup > Information > Version page.
Note
Before you begin, you will need to obtain the new firmware and save it to your
PC or to an external drive.
Click Import.
Navigate to the location of the firmware file (.bin), select it, and then click Open. The file
name appears in the Select Firmware File field.
Click Upgrade to install the firmware.
Reboot the camera.
Configuring System Settings | 79
800-23288 - A - 07/2017