Selecting A Component To Be Controlled; Controlling Optional Components (Option Mode); Customizing The Remote Control - Yamaha RX-Z11 Owner's Manual

■ Selecting a component to be controlled

You can select a component to be controlled independently of the
input source selected with the input selector buttons.
Press 5 SELECT l / h repeatedly to select the desired
component.
The name of the component to be controlled appears in the display
window (4) on the remote control.
DVD
■ Controlling optional components (Option
mode)
"OPTN1" and "OPTN2" are optional component control areas that
can be programmed with remote control functions independently
from any input source. This areas are useful for programming
commands that are to be used only as a part of a macro function or
for components that do not have a valid remote control code.
To select the option mode, press 5 SELECT l / h
repeatedly until "OPTN1" or "OPTN2" appears in the
display window (4) on the remote control.
OPTN1
or
OPTN2
Note
You cannot set a remote control code for the optional component control
areas. See page 126 to program buttons operated within these component
control areas.

Customizing the remote control

Use the setup mode of the remote control to customize the remote
control.
1
Press GSETUP on the remote control using a
ballpoint pen or similar object.
"SETUP" appears in the display window on the remote control.
2
Press 9k / n repeatedly to select the desired setup
mode.
Setup mode Descriptions
SETUP Top setup mode menu.
Learning mode. Use this feature to program codes
LEARN
from other remote controls.
Preset mode. Use this feature to change the remote
P-SET
control code of each control area.
Renaming mode.Use this feature to change the
RNAME
name of each control area.
Macro programming mode.Use this feature to set
MACRO
the macro program.
Clearing mode. Use this feature to clear the
CLEAR
configurations of this unit.
Erase mode. Use this feature to erase the learned
ERASE
functions of each button.
Extended IR code mode. This feature is for the
EX-IR
authorized custom installers only.
Backlight mode. Use this feature to set the light up
LIGHT
mode of the remote control.
3
After the configurations, press GSETUP again to
exit from the setup menu.
Note
If you do not complete each of the operations within 30 seconds, this
unit automatically exits from the setup menu.
Remote control features
Page
–
126
124
127
129
130
131
—
124
123
En