Adjusting The Tonal Quality Of Zone 2, Zone 3, Or Zone 4; Using The Zone Osd; Using The Party Mode - Yamaha RX-Z11 Owner's Manual

■ Adjusting the tonal quality of Zone 2, Zone 3, or
Zone 4
Press QTONE CONTROL on the front panel.
1
2
Press MPROGRAM repeatedly to select the high-
frequency response (TREBLE), the low-frequency
response (BASS).
3
Rotate MPROGRAM to adjust the high-frequency
response (BASS).
Control range: –10.0 dB to +10.0 dB

■ Using the Zone OSD

You can display the FM/AM radio, XM Satellite Radio (U.S.A. and
Canada models only), or HD Radio tuning information in the Zone
video monitor. You can also browse and select the iPod or network/
USB contents by using the Zone OSD.
1
Set the operation mode selector to FSOURCE and
then press the desired input selector button (3).
2
Press KDISPLAY on the remote control to turn on
the Zone OSD.
3
Press 9k / n / l / h and 9ENTER repeatedly to
navigate the menu on the Zone OSD.
TOP
PC/MCX
NET RADIO
USB
Notes
• The OSD menu appears in English even if you set "LANGUAGE" to
"JAPANESE" or "RUSSIAN" (see page 144).
• There are some characters that cannot be displayed in the front panel
display or in the OSD of this unit. Those characters are replaced with
underscores "_".
• You can set the time for which the Zone OSD is displayed in the Zone
video monitor by using "On Screen" in "Manual Setup" (see page 108).
y
Short message displays are also appears in the Zone video monitor. Use
"Zone OSD" in "Manual Setup" to select that this unit displays the
operational information of all zones or zone 2 only (see page 110).

Using the party mode

Use this feature to play the main zone sources in the other zones
simultaneously. This feature is useful to play back a back ground
music in multiple zone in a home party.
1,2,3 ··· In the party mode, this unit distributes the same sources
Turning on the party mode
Before performing the following operations, set the operation mode
>
selector on the remote control to F AMP.
>
>
Press CPARTY on the remote control to turn on the
party mode.
"PARTY MODE ON" appears in the front panel display and then
the main zone and the zones which join the party mode are turned
on.
Turning off the party mode
Press CPARTY again to turn off the party mode.
"PARTY MODE OFF" appears in the front panel display and then
the main zone and the zones that joins the party mode are turned off.
y
When this unit is in the party mode, the audio signals that is input at the
HDMI IN jacks or DIGITAL IN jacks are output at the ZONE OUT jacks.
Notes
• If you select "MULTI CH" as the input source, this unit does not output
any sounds when this unit is in the party mode.
• When you change the input source of the zone that joins the party mode,
the input source of the main zone also changes same as the operated zone.
• When this unit is in the party mode, no signals are not output at the OUT
(REC) jacks.
Selecting the zones joining the party mode
You can select the zone that joins the party mode by using the
"Party Mode Set" parameters. If a zone does not join the party
mode, you can play back a source in the zone independently
from the main zone. See page 109 for details.
MAIN ZONE
MASTER PURE DIRECT
ON
ON/OFF OFF
INPUT STRAIGHT TUNING MODE MEMORY FM/AM PRESET/TUNING PROGRAM MENU VOLUME
SPEAKERS EDIT
AUDIO SELECT A B EFFECT DISPLAY MAN'L/AUTO CATEGORY SEARCH MODE
ZONE REC OUT/
ZONE ON/OFF CONTROLS ZONE 2 TONE CONTROL
ZONE MULTI
ZONE 2 ZONE 3 ZONE 4 PUSH ENTER
SILENT CINEMA YPAO S VIDEO VIDEO L AUDIO R OPTICAL
OPTIMIZER
PHONES MIC VIDEO AUX HDMI IN USB
1 2
4 3
to the zones which join the party mode.
4 ··· You can also operate the specific zone separately when
this unit is in the party mode.
Using multi-zone configuration
141
En