Connecting Other Components - Yamaha RX-Z11 Owner's Manual

Connections

Connecting other components

Make sure that this unit and other components
are unplugged from the AC wall outlets.
Notes
• When "Conversion" is set to "Off" (see page 107), be sure to make the
same type of video connections as those made for your TV (see page 31).
For example, if you connected your TV to the VIDEO MONITOR OUT
jack of this unit, connect your other components to the VIDEO jacks.
■ Connecting a Blu-ray Disc or HD DVD player
Connect your Blu-ray Disc or HD DVD player to the HDMI IN1 jack of this unit to perform the features of the Blu-ray Disc or HD DVD
completely.
32
En
Component out
Y P P
B R
COMPONENT VIDEO
Y P P
B R
BD/
HD DVD
A
• When "Conversion" is set to "On" (see page 107), the converted video
signals are output only at the MONITOR OUT jacks. When recording a
source, you must make the same type of video connections between each
component.
• To make a digital connection to a component other than the default
component assigned to each DIGITAL INPUT or DIGITAL OUTPUT
jack, select the corresponding setting for "Optical Input", "Optical
Output", or "Coaxial Input" in "I/O Assignment" (see page 96).
• If you connect your DVD player to both the DIGITAL INPUT (OPTICAL)
and the DIGITAL INPUT (COAXIAL) jacks, priority is given to the
signals input at the DIGITAL INPUT (COAXIAL) jack.
Blu-ray Disc or
HD DVD player
Coaxial out
HDMI out
HDMI
IN1
BD/HD DVD
indicates recommended connections
indicates alternative connections
C
BD/
6
HD DVD
7
COAXIAL
DIGITAL IN
(U.S.A. model)