Setting The Backlight Mode Of The Remote Control (Light); Setting Remote Control Codes (P-Set) - Yamaha RX-Z11 Owner's Manual

Remote control features
Setting the backlight mode of the remote
control (LIGHT)
You can set the backlight mode of the remote control.
1
Press GSETUP on the remote control using a
ballpoint pen or similar object.
"SETUP" appears in the display window (4) on the remote
control.
2
Press 9k / n repeatedly to select "LIGHT" and then
press 9ENTER.
"LIGHT" and the current "LIGHT" setting appears in the
display window (4) alternately.
LIGHT
3
Press 9k / n to select the desired setting.
Choice
ON Lights up the backlight when a button is pressed
or the remote control detects a motion.
Lights up the backlight only when 6LIGHT is
OFF
pressed.
4
Press GSETUP again to exit from the setup mode.
y
You can light up the backlight by pressing 6LIGHT anytime.

Setting remote control codes (P-SET)

You can control other components by setting the appropriate remote
control codes. Codes can be set up for each control area. For a
complete list of available remote control codes, refer to "List of
remote control codes" at the end of this manual.
The following table shows the default component (Library:
component category) and the remote control code for each control
area.
124
En
ON
Current "LIGHT" setting
Descriptions
Remote control code default settings
Library
Control area (component
category)
MULTI DVD
V-AUX —
PHONO —
MD TAPE MD
BD
DVD
HD DVD
DVD DVD
CD CD
CD-R CD-R
CBL
—
SAT
DTV —
DVR DVR
VCR —
TUNER SOURCE
DOCK SOURCE
NET
SOURCE
USB
XM
(U.S.A. and SOURCE
Canada models)
(TAPE)
TAPE
(Australia model)
TV —
Note
You may not be able to operate your Yamaha component even if a Yamaha
remote control code is preset as listed above.
In this case, try setting another Yamaha remote control code.
1
Press GSETUP on the remote control using a
ballpoint pen or similar object.
The remote control enters the setup menu. "SETUP" appears in
the display window (4) on the remote control.
SETUP
2
Press 9k / n repeatedly to select "P-SET" and then
press 9ENTER.
The remote control enters the preset mode. "P-SET" and name
of the currently selected control area appears in the display
window (4) alternately.
P-SET
Default
Manufacturer
code
Yamaha 04306
— —
— —
Yamaha 00409
Yamaha 04306
Yamaha 04306
Yamaha 01105
Yamaha 01405
— —
— —
Yamaha 00707
— —
Yamaha 00012
Yamaha 00012
Yamaha 00012
Yamaha 00012
Yamaha 00311
— —