Connecting Audio Components - Yamaha RX-Z11 Owner's Manual

■ Connecting audio components

Notes
• Connect your turntable to the GND terminal of this unit to reduce noise in the signal. However, you may hear less noise without the connection to the GND
terminal for some turntables.
• The PHONO jacks are only compatible with a turntable with an MM or a high-output MC cartridge. To connect a turntable with a low-output MC cartridge
to the PHONO jacks, use an in-line boosting transformer or an MC-head amplifier.
• When you connect both the DIGITAL INPUT (OPTICAL) jack and the DIGITAL INPUT (COAXIAL) jack to an audio component, the priority is given to
the DIGITAL INPUT (COAXIAL) jack.
CD recorder
L R L R
O
AUDIO OUT
CD-R MD/TAPE CD-R
O
L R L R
MD recorder or
tape deck
CD player
L R C
DIGITAL OUT
CD-R
OPTICAL
AUDIO IN
MD/TAPE
MD/TAPE CD PHONO
L
1
R
OPTICAL
CD
GND
5
COAXIAL
DIGITAL IN
(U.S.A. model)
L R
Turntable
indicates recommended connections
indicates alternative connections
Connections
35
En