Auto Setup - Yamaha RX-Z11 Owner's Manual

Troubleshooting
■ iPod
Note
In case of a transmission error without a status message appearing in the front panel and in the video monitor, check the connection to your iPod (see page 38).
Status message
Loading...
Connect error
Unknown iPod
iPod connected
Disconnected
Unable to play

■ Auto Setup

Before Auto Setup
Error message
Connect MIC!
Unplug Phones!
No Setup Menu!
Memory Guard!
152
En
Cause
This unit is in the middle of recognizing the
connection with your iPod.
This unit is in the middle of acquiring song lists
from your iPod.
There is a problem with the signal path from your
iPod to this unit.
The iPod being used is not supported by this unit.
Your iPod is properly stationed in a Yamaha iPod
universal dock (such as the YDS-10, sold
separately) connected to the DOCK terminal of
this unit, and the connection between your iPod
and this unit is complete.
Your iPod was removed from a Yamaha iPod
universal dock (such as YDS-10 sold separately)
connected to the DOCK terminal of this unit.
This unit cannot play back the songs currently
stored on your iPod.
Cause
Optimizer microphone is not connected.
Headphones are connected.
No check items are selected as the measurement
items.
"Memory Guard" is set to "On".
Remedy
Turn off this unit and reconnect the Yamaha iPod universal
dock to the DOCK terminal of this unit.
Try resetting your iPod.
Only iPod (Click and Wheel), iPod nano, and iPod mini are
supported.
Station your iPod back in a Yamaha iPod universal dock (such
as YDS-10 sold separately) connected to the DOCK terminal
of this unit.
Check that the songs currently stored on your iPod are
playable.
Store some other playable music files on your iPod.
Remedy
Connect the supplied optimizer microphone to the
OPTIMIZER MIC jack on the front panel.
Unplug the headphones.
Select the desired check item.
Set "Memory Guard" to "Off".
See page
38
—
—
38
—
—
See page
47
—
48
113