Selecting Preset Stations; Automatic Preset Tuning - Yamaha RX-Z11 Owner's Manual

FM/AM tuning
Before performing the following operations, set the operation mode
selector on the remote control to F SOURCE and then press
3TUNER.

Selecting preset stations

You can tune into any desired station simply by selecting the preset
station group and number under which it was stored.
Preset the desired stations to this unit by using the automatic or manual
preset tuning features in advance (see "Automatic preset tuning" on this
page and "Manual preset tuning" on page 71).
1
Make sure that a colon (:) appears in the front panel
display.
If the colon (:) does not appears in the front panel display, press
L PRESET/TUNING (or ISRCH MODE so that the colon
(:) appears.
A : F M 8 8 . 9 M H z
Colon (:)
Press M PROGRAM (or press 9A-E l / h
2
repeatedly) to select the desired preset station group
(A to E).
The preset station group letter appears in the front panel
display and changes each time you push M PROGRAM.
Rotate M PROGRAM (or press 9 PRESET/CH k / n
3
repeatedly) to select a preset station number (1 to 8).
The preset station group and number appear in the front panel
display along with station band and frequency.
A 1 : F M 8 8 . 9 M H z
y
You can also select the desired preset station number by pressing the
numeric button (1 to 8) (B).

Automatic preset tuning

(Canada and Australia models) You can use the automatic preset
tuning feature to store up to 40 FM stations with strong signals (A1
to E8: 8 preset station numbers in each of the 5 preset station
groups) in order. You can then recall any preset station easily by
selecting the preset station number.
(U.S.A. model) You can use the automatic preset tuning feature to
store up to 40 AM HD Radio, FM HD Radio, and analog FM radio
stations with strong signals.
y
To preset the AM stations, use the manual preset tuning feature.
Rotate the D INPUT selector (or press 3 TUNER) to
1
select "TUNER" the input source.
70
En
Press K BAND (or 8 BAND) repeatedly to select
2
"FM" as the reception band.
"FM" appears in the front panel display.
(Canada and Australia models)
3
Press and hold JMEMORY (or 0MEMORY) for
more than 3 seconds.
A 1 : F M 8 8 . 9 M H z
The AUTO and MEMORY indicators flash. After
approximately 10 seconds, automatic presetting starts from the
current frequency and proceeds toward higher frequencies.
When the automatic presetting is completed, the AUTO and
MEMORY indicators disappear.
y
• You can specify the preset number from which this unit stores FM
stations. After you perform step 3, press MPROGRAM (or 9A-E
l / h) repeatedly to select the desired preset group and then rotate
MPROGRAM (or press 9PRESET/CH k / n repeatedly) to select
the preset station number which the first station will be stored.
• You can begin the tuning toward lower frequencies to store FM
stations automatically. Press LPRESET/TUNING so that the colon
(:) disappears from the front panel display and then turn
MPROGRAM leftward after pressing and holding JMEMORY for
more than 3 seconds.
(U.S.A. model)
3
Press and hold JMEMORY (or 0MEMORY) for
more than 3 seconds.
The AUTO and MEMORY indicators flash, and this unit starts
automatic presetting starts from the current frequency and
proceeds toward higher frequencies immediately. This unit
searches the stations by the following order:
1. FM HD Radio stations
2. AM HD Radio stations
3. Analog FM stations
When the automatic presetting is completed, the AUTO and
MEMORY indicators disappear.
y
"Please wait" appears in the front panel display when this unit is
searching the stations by using the tuner unit that is not selected by
"TUNER" (see page 96).
Notes
• Any stored station data existing under a preset station number is cleared
when you store a new station under the same preset station number.
• If the number of received stations does not reach 40 (E8), automatic preset
tuning automatically stops after searching for all the available stations.
• Only FM stations with sufficient signal strength are stored automatically
by automatic preset tuning. If the station you want to store is weak in
signal strength, tune into it manually and store it as described in "Manual
preset tuning" on page 71.
AUTO
MEMORY
Flash