Honeywell DR Graphic Installation Instruction page 9

Sr. No. Cable Description
Relay extension cable – for status of power
1
relay
Touch Screen Extension Cable – for
2 extending the touch screen connections
from the touch screen to the CPU board
Backlight Cable – For backlight driver
3
board
4 LVDS Cable – For LCD data
Speaker cable – For extending the speaker
5
connections
Earth Braid – For strong ground
6
connection
7 6 Pin Power Cable
27. Connect all the cables as per the information in the above table and as shown in Figure 13.
43-TV-33-214 iss.2 GLO May 2015 UK
Source - Description
Power supply Board to Backplane board (J10)
Touch screen in Bezel to CPU board in case (J5 – Notch
on cable should face EXT SD connector – J8)
Backlight driver board to backlight connector on the CPU
board (J14)
From LCD in bezel to CPU board (J11)
Speaker to speaker connector on the TVDRG2 backplane
board (J6)
From LCD bracket to the IO cards chassis
Power Supply Board to Backplane Board (J10)
Figure 13
Cables reconnected inside the
slant chassis plate
9