Honeywell DR Graphic Installation Instruction page 4

6. Remove the three criclips to unlock the hinge pins shown by the black arrows in Figure 5. The circlips can be
removed by pulling them out using a pair of needle nose pliers.
7. Push out the hinge pin using a pointed tool like screw driver as shown in Figure 6.
Once the hinge pins are pushed out by 5 to 7mm use a nose plier to pull the three hinge pins out of the hinges.
43-TV-33-214 iss.2 GLO May 2015 UK
Figure 5
Positions of circlips
Figure 6
Removing hinge pin
4