Honeywell DR Graphic Installation Instruction page 10

28. Replace the slanted chassis plate and fit it back along with the earth braid using 2x No.4/40 screws.
29. Make sure all the screws shown in red and green colour in Figure 14 are connected back.
Figure 14 — Reconnecting slant chassis & IO card chassis
30. Reconnect the CJCs, IO cabling and Power cable as required.
31. Close the door.
32. If the recorder has been removed from the panel, secure it back into the panel using the mounting brackets.
Copyrighted Materials. For more information please contact your supplier.
43-TV-33-214 iss.2 GLO May 2015 UK 10