Honeywell DR Graphic Installation Instruction page 7

18. Route the LCD data cable through the LCD bracket as shown in Figure 11 and then hold it in place with a cable tie.
19. Make sure that LCD backlight cable, data cable and touch screen extension cable are routed to the right side below
the LCD bracket step.
20. Reconnect 18x #8-32 screws on LCD bracket.
See Figure 11.
21. Reconnect the Earth braid on the LCD bracket.
22. Put a spiral wrap around all the cables.
43-TV-33-214 iss.2 GLO May 2015 UK
Figure 11
Reconnecting display bracket
and routing cables on bezel side
7