Makita DVC860L Technical Information page 5

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Motor section
DISASSEMBLING
(2) Take out Motor assembly. Fig.3
Fig. 3
Connector
(39)
Lead wire
of (39)
(27)
(34)
(43)
(65)
Lead wire
holder
(43)
(39)
(38)
5. Remove Rubber
ring 60 (38) and
(40)
Rubber ring 120 (40)
from Motor
assembly (39).
(39)
1. Tracing Lead wires connected to Motor assembly (39),
disconnect the Connector that is connected to
Controller C (65).
2. Lifting up Controller B (27), remove Lead wires of
Motor assembly from Lead wire holder.
3. Lift up Separator (34) while pressing down
Tank cover complete (43).
4. Remove Motor assembly (39) from Tank
cover complete (43).
Lock device
< Note >
While pressing Lock device of Terminal with small
slotted head screwdriver or pricker, pull out Lead wire
from Motor assembly (39).
P 5/ 29
(39)
Small slotted head
screwdriver or pricker