Makita DVC860L Technical Information page 25

W
iring diagram
Fig. D-6
Put the lead wires for connecting to Terminal A to this Lead wire
holder, however, avoid to put AS lead wire to the top.
Put the lead wires for
connecting to Terminals
A and B, between Rib G
and Rib H.
Rib G
Rib H
Viewed from A side
in the illustration below
Put Connector (2 poles) to the illustrated place.
Rib P
Rib Q
Put Connectors lead wires (2 poles)
between Rib P and Rib Q.
Do not put Connectors
lead wires (2 poles) on
Relay.
Put Connector (10 poles)
and sag portion of its Lead
wires, to the place between
Rib M and Rib N.
Wiring in Separator 2
Terminal A AS Lead wire
Connector
Connector
(2 poles)
(4 poles)
A
Rib N Rib M
Relay
Relay
Put the lead wires for connecting
to Terminal B to this Lead wire
holder, however, avoid to put AS
Terminal B
lead wire to the top.
Viewed from A side
in the illustration below
Put Connector (4 poles) to the illustrated place.
Hook
Put Connectors lead wires (4 poles) closely
by hook.
Do not to put any lead wires on Rib C.
Rib C
Do not put Connectors
lead wires (4 poles) on
Relay.
Controller C
P 25/ 29